VIKING ELECTRONICS - K-1700-3-EWP - ENHANCED WEATHER PROTECTION PANEL PHONE
VIKING ELECTRONICS
Model: K-1700-3-EWP
ENHANCED WEATHER PROTECTION PANEL PHONE
Attractive, Vandal Resistant, Handsfree Speaker Phone
The K-1700-3 provides a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant speaker phone.
When the %u201CCall%u201D button is pressed, the K-1700-3 returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected, a busy signal is detected, or the programmable maximum call time has elapsed, the K- 1700-3 will automatically disconnect. Alternatively, the K-1700-3 may be disconnected by pressing the %u201CCall%u201D button again. The K-1700-3 comes complete with a standard, flush mount, rough-in box. In addition, an optional weather resistant, surface mount box is available.
For outdoor or harsh environments, the K-1700-3 is available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled butt connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.
Details:
Vandal Resistant Features: 14 gauge, louvered, stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and %u201CCall%u201D button
Optional Enhanced Weather Protection (EWP)
Yellow %u201Cin use%u201D LED
Volume adjustments for microphone and speaker
Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out
Selectable auto-answer feature
Selectable push button disconnect
Zinc plated steel rough-in box with (2) 3/4%u201D conduit knockouts
Optional VE-6x7 Surface Mount Box available
Selectable maximum call time
Selectable VOX switching speed
K-1700-3-EWP conforms to NEMA requirements
Made in the USA
Power: Telephone line powered 20V DC/20mA minimum
Dimensions:
Overall: 140mm x 165mm x 66mm (5.5%u201D x 6.5%u201D x 2.6%u201D) , Rough-in
box: 114mm x 140mm x 64mm (4.5%u201D x 5.5%u201D x 2.5%u201D)
Environment: -26 deg C to 54 deg C (-15 deg F to 130 deg F) with up to 100% condensing humidity
Speaker Volume: approximately 70 db maximum @1m
Connections: Standard - (1) two-position terminal block, EWP - Gel-filled tip and ring connectors
CPC Disconnect Time: 300ms minimum
REN #: 0.5 A