BOGEN - BG-TAMB - Bogen Telephone Access Module
BOGEN
Model: BG-TAMB
- Bogen telephone access module
- Loop start, ground start, and station port (90V ring up) compatibility
- 600-ohm output
- Built-in confirmation tone indicating access to paging system (defeatable)
- Built-in pre-announce tone produced over paging system before announcement (defeatable)
- Adjustable tone volume
- Works with one-way and two-way (talk back) zones
- Background music input with volume control
- Suppresses background music during paging
- Station access disconnect is dynamically controlled using a combination of disconnect timer, silence interval timer, and Calling Party Control (CPC) signal detection
- Disconnect timer is adjustable from 6 to 35 seconds (defeatable)
- Silence interval timer is adjustable from 2 to 6 seconds of silence
- Calling Party Control (CPC) signal from switch immediately disconnects station port
- No power supply needed for station port interfacing
- 1 Normally open contact pair available for operating equipment
- Punch-block connections (type 66)
- Wall-mount design
- FCC part 68 approved
- ETL listed
BGTAMB