MODEL- BB-HCM511A         VENDOR- PANASONIC CONSUMER

FEATURES- Network Camera with 2-way Audio
       Power over Ethernet (PoE) MPEG-4 Network Camera with Preset Modes,
        Progressive Scan, Analog Video Output and SD Card Recording with
        Audio.
       Place this plug-and-play camera in your home, office, vacation home
        or almost anywhere else you'd like to keep an eye on things, with
        no PC required at the location. The camera can be viewed and
        controlled from a standard Web browser, video display, or even a
        compatible cell phone or PDA and requires no additional software
        for the PC that you're viewing it on. All of the other required
        software, including control software (TCP/UDP) and e-mail software
        (SMTP), is already inside the camera.
* Any Image Bright and Clear
   This camera features a CCD (Charged Couple Device) for sharp, enhanced
   image expression. The image refreshing speed (maximum) has been
   increased to 30 images per second for smoother displays of moving
   images.
* Two-Way Voice Communication
   Use of the built-in microphone and a separately purchased amp-equipped
   speaker enables two-way voice communication (transceiver system) between
   the network camera and a PC used to monitor the camera image. In
   addition to conventional monitoring of images and sound, voice messages
   can be transmitted from the PC to the network camera. Voice transmission
   and reception can be switched easily from the PC used to monitor the
   image.
* Record Directly onto SD Cards
   The camera features an SD Memory Card slot for recording images captured
   by the network camera directly onto an SD Memory Card (sold separately).
* Power up without a PC
   Power over Ethernet (PoE) means you can use your camera without
   connecting to a PC. Just plug your camera into a wall outlet, and both
   the power and the data are transmitted over the same CAT5 wire. Plus,
   each camera has a built-in Web server with IP address. To view the
   camera's images on a PC, simply open a graphics-capable Web browser and
   type in the cameras specified Internet address (password optional).
* Control the Camera Remotely
   Using a standard Web browser, video display, or even a compatible cell
   phone or PDA, you can control the movement of the camera. There is Pan
   (left & right) movement and Tilt (up & down) movement available. You can
   also assign a "Home Position" that allows you to return the camera to a
   pre-designated shooting position. Up to eight shooting positions can be
   registered in advance, so you can aim the camera exactly where you want
   it. You can also click on the part of the image you want to see, and
   automatically bring that part to the center of the screen.
* Sensor Recording and Image Alerts
   With the built-in heat sensor, the camera can be set to record and/or
   notify you when someone enters the room. It can even automatically move
   to a preset location when triggered, just in case someone was viewing a
   different part of the room.
* Record Only What You Want to Record
   The camera can be set to automatically record video at certain times and
   certain speeds. In addition, with optional, external sensors attached to
   the camera, it is possible for the camera to email or record when
   triggered by motion, sound, light, timer, or even a push button. These
   convenient functions eliminate your need to constantly check the image.
* Create Your Own Free Web Address
   The FREE viewnetcam.com service allows you to create a personal Web
   address (e.g., http://bob.viewnetcam.com) at which your camera's live
   image can be found on the Internet. Access your Panasonic Network Camera
   live from virtually any Internet connection point around the world! Your
   Web browser is the only software you'll need. Here's how the camera and
   service works: special software embedded within your Panasonic Network
   Camera gives your camera the ability to locate your unique Internet
   address. No matter what kind of Internet connection you have or which
   Internet provider you use, the viewnetcam.com service will keep your
   camera's Internet address permanent.

  -- SPECIFICATIONs -------------------------------------
Pan/Tilt/Digital Zoom with Presets
PoE (802.3af-compliant)
Progressive Scan
Analog Video Output
Simultaneous MPEG-4 and JPEG
SD Card Recording with Audio
0.09 Lux Color Night View Mode
Up to 30 Frames per Second CCD
Full Screen Monitoring
Remote Monitoring from Cell Phone
Full Screen 4-up and 12-up Multi-camera Pages
Up to 30 Video Users
Built-in Web Server/IP Address (IPv4/v6)
Audio Capability (2-way)
Built-in Microphone
Dual Sensor Input to Trigger Movement
Image Transfer by Motion Detection, Sensor Alert, Timer
Password Protection
Plug-and-play Installation
Free Web Address like http://bob.viewnetcam.com
Multi-language Interface
Image Date and Time Stamp
www.panasonic.com