MODEL- AP7750             VENDOR- AMERICAN POWER CONVERSION

FEATURES- Rack Automatic Transfer Switch (ATS)- Black
       Provides redundant power to single-corded equipment.
       APC Rack Automatic Transfer Switch, Input: 120V, Input Connection
        Type: NEMA 5-15P, Cord Length: 8 feet (2.44 meters), Output: 100,
        120V, Output Connections: (8) NEMA 5-15R.
       APC s Rack Automatic Transfer Switch (ATS), also known as the
        Redundant Switch, is a high availability switch that has two input
        power cords, one for each AC line, which provide redundant power to
        connected equipment. The Rack ATS is designed to supply power to
        the connected load from a primary AC source. If that primary source
        becomes unavailable for whatever reason, the Rack ATS will
        automatically begin sourcing power from the secondary source. The
        transfer time from one source to the other is seamless to the
        connected equipment. The Networked units have built-in network
        connectivity, which allows for remote management via Web, SNMP, or
        Telnet interfaces.
    Includes ATS, Rack mounting brackets, User manual.
* Dual Input Power Sources
   Supplies redundant AC power to connected equipment. Two AC lines power
   the unit and if the primary AC power fails, the unit will automatically
   switch to the alternate power source.
* Network Management
   Full-featured network management interfaces that provide standards-based
   management via Web, SNMP, and Telnet. Allows users to access, configure,
   and manage units from remote locations to save valuable time. Associated
   with this feature is the ability to quickly and easily upgrade the
   firmware via network download to installed units for future product
   enhancements. (Note: Only applicable for units categorized as
   Networked).
* Information Displays
   Indicates the status of the AC sources powering the units, as well as
   indicates which source is set as the primary source and which source is
   currently supplying power to the load. This provides a visual depiction
   of the power flow from the input to the load. This allows the user to
   quickly glance at the power flow and status of the input sources without
   connecting to the unit. (Note: The non-Networked units only supply
   status information and does not have a visual depiction of the power
   flow).
* Rack-Mountable
   Occupys only 1U of valuable rack space. Puts the power where it is
   needed most - in the rack near the equipment.
* Wide range of input and output connections
   Product family includes a variety of input and output connections to
   distribute 120V, 208V, or 230V power to multiple outlets. Having a
   variety of inputs and outputs allow users to adapt to varying power
   requirements. APC offers units that bring up to 5.7kW using a single
   branch whip.

  -- SPECIFICATIONS -------------------------------------
OUTPUT - Output Voltage(s) (main only): 100, 120 V
  Maximum Total Current Draw per Phase: 12 A
                    Output Connections: (8) NEMA 5-15R
INPUT  - Nominal input voltage        : 120
         Input frequency (Hz)         : 50/60 Hz
         Input Connection Type        : NEMA 5-15P
         Cord Length                  : 8 feet (2.44 meters)
         Acceptable Input Voltage     : 100~125 VAC
         Max. Line Current per phase  : 12.0 A
         Max. Input Current per phase : 12.0 A
         Load Capacity                : 1440
ENVIRONMENTAL-
         Operating Temperature        : 23 ~ 113 degrees F
         Operating Relative Humidity  : 0 ~ 95 %
         Operating Elevation          : 0 ~ 10,000 ft.
         Storage Temperature          : -13 ~ 149 degrees F
         Storage Relative Humidity    : 0 ~ 95 % Non-condensing
         Storage Elevation            : 0 ~ 50,000 ft.
APPROVALS- cUL Listed, FCC Part 15 Class A, UL Listed, VCCI
SIZE - 17.0"w x 1.75"h x 9.00"d              WT.- 8.60 lbs.
   www.apcc.com